|
Product Details:
Payment & Shipping Terms:
|
Type: | Laser | Laser Type:: | Diode Laser |
---|---|---|---|
Q-Switch: | No | Guarantee: | 2 Years |
Brand: | Nourifo | Service: | 2 Years |
High Light: | laser lipo machine,lipo weight loss machine |
High efficiency Non-invasive abdomen stubborn fat remove
Laser Permanent Fat Cell Destruction
1. What is ?
Sculplase is a non-invasive body contouring system for the reduction of stubborn fat in areas such as the abdomen and love handles.
The 25 minute procedure destroys up to 24% of treated fat cells without surgery.
The world first Sculpsure same technology,with state-of-the-art,controlled light-based technology, ideal for patients looking to get rid of stubborn fat.
2. How Sculplase works?
Sculplase works by heating the fat cells with 635nm+650 or 980nm/1064nm (customiszed) wavelength laser light to a temperature that causes lipolysis, or fat cell death. The special applicators, which lay flat on the skin, heat the fat layer
while simultaneously cooling the surface of the skin for patient comfort. Over a period of 6-12 weeks, the destroyed fat cells are naturally eliminated from the body through
the lymphatic system.
3. How the Sculplase treatment is performed (what to expect)?
In the procedure room, you will be positioned on a comfortable treatment table and the applicators will be placed on the target area(s).
When the treatment begins, you will initially feel a cooling sensation, followed by intermittent waves of warmth.
The warming sensation is an indication that the Sculplase laser is in the fat destruction mode.
Most patients also could feel a tingling sensation intermittently throughout the treatment which is generally well tolerated.
After the treatment is completed, you are free to return to work or home and resume normal activities.
There is no post-procedure garment to wear. There is truly no downtime with this procedure.
The whole treatment takes 25 minutes.
4. Sculplase specification:
Technology | Diode laser |
Wavelength | 635+650 |
Pulse Width | Continuous Working mode |
Power Output | 5w,10w,15w |
Power Density | 0.7-1.7W/cm2 |
Treatment Window | 40mmX80mm |
Aiming Beam | None |
Electrical Requirement | 230VAC (20 amp circuit required) |
Size | 815mmx915mmx1700mm |
Weight | 1.5kg |
Applicators | 4pcs |
Treatment time | 25min |
5. Who can use Sculplase?
Sculplase is ideal for people with trouble fat pockets,particularly those of the belly,abdomen,flanks and love handles, that seem resistant to diet and exercise.
6. How many treatments will I need?
Most patients see results with as little as one treatment.However, the patients may wish to have addtitional treatments based on their desired results.In general, the Clinic will have a consultation to create the best treatment plan for every patient.
7. When can the patient expect to see results?
Many patients start to see results as early as 6 weeks following treatment as the body begins to evacuate the destroyed fat cells,with optimal results usually seen at 12 weeks.
8. Do Sculplase results last forever?
Treated fat cells are permanently destroyed during the treatment and will not regenerate.And although the treated areas will always be proportionally smaller, patients do need to continue a
healthy lifestyle to prevent overall weight gain.
9. What is the difference between fat loss and weight loss?
The number of fat cells stored in our bodies typically remain constant throughout adult life.After the Sculplase treatment, the destroyed fat cells will never return.
However,as we lose weight, the size of fat cells become smaller,but typically do not decrease in number.Even with diet and exercise,many people have difficulty losing weight in these trouble areas.
10. What is the difference between Sculplase and Cool Sculp ting?
1) Treatment time:
Sculplase only takes 25 minutes per treatment whereas Cool Sculp ting will take about an hour.
2) Treatment tolerability
Many patients report pain during Cool Sculp ting as the skin and fat layer have to be suctioned into the applicator. Patients report little to no discomfort during Sculplase.
3) Effectiveness
Both Sculplase and CoolSculpting have been proven to reduce the fat layer. In clinical trials, Sculplase has been shown to reduce the fat layer slightly more than Cool Sculp ting.
(24% vs 22%)
4) Naturalness of results
Sculplase has applicators that lay flat and disperse heat deep and laterally to blend the reduced area with the surrounding tissue. Because Cool Sculp ting literally “suctions” the
area, it has a problem called “shelfing”. This is where you can see an unnatural ridge where the applicator was positioned.
11. Can the Patient have Sculplase if he have already had Liposuction or Cool Sculp ting?
Yes, Sculplase can be used to treat residual fat in areas that have been treated before with other modalities. Sculplase can even be used to treat “shelfing” defects that are
sometimes caused by CoolSculpting.
12. Does Sculplase treatment hurt?
The Sculplase procedure is not painful. Most patients state that they feel a tingling sensation, with intermittent cool and warmth.
13. What body areas can be treated with Sculplase?
Sculplase has been cleared by the CE ISO for treatment of the abdomen and flanks/love handles. However, because the of flexible design of applicators, we are able to treat “off-
label” areas to include the inner and outer thighs, back, arms, buttocks and chin.
14.How can I buy it?
If any questions about the high efficiency fat removal device Sculplase, please feel free to contact Ms.Lydia
Tel: 86---18971500919
Fax: 86-27-84805419